Routerbox: Difference between revisions
(Created page with "{{PhysicalMachine | cpu = Intel J4125 (4 cores) | image = routerbox.jpg | memory = 8Gb | oss = XCP-ng 8.3.0 | disks = 2x 256Gb SSDs | nics = 4x 2.5Gb Intel I225v3 NICs }}") |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
| image = routerbox.jpg | | image = routerbox.jpg | ||
| memory = 8Gb | | memory = 8Gb | ||
| oss = | | oss = Proxmox 8.2.2 | ||
| disks = 2x 256Gb SSDs | | disks = 2x 256Gb SSDs | ||
| nics = 4x 2.5Gb Intel I225v3 NICs | | nics = 4x 2.5Gb Intel I225v3 NICs | ||
}} | }} | ||
I was disappointed with the performance of my Netgate SG-1100 router so I decided to upgrade to this chinese router. It uses around the same amount of power as the Netgate, with an order of magnitude more preformance. Mine is used as a virtualization platform. There are newer models than this on the market, for example ones using the new Intel N100 CPU, but I chose this one since it uses less power. This one can be powered off POE+ from the [[Switches#TL-SG3428XMP|TL-SG3428XMP]]. Three of the NICs are passed through to the [[Pfsense router]] VM, using PCIe passthrough. The fourth is used as a management port. | |||
It has the following VMs: | |||
* [[Pfsense router]] | |||
* [[wifi-omada0]] | |||
The hypervisor used is Proxmox. For years I used XCP-NG, and honestly I still prefer it, but it became too buggy so I switched to Proxmox instead. The transition process was very long and intensive! | |||
Latest revision as of 16:26, 28 November 2024
I was disappointed with the performance of my Netgate SG-1100 router so I decided to upgrade to this chinese router. It uses around the same amount of power as the Netgate, with an order of magnitude more preformance. Mine is used as a virtualization platform. There are newer models than this on the market, for example ones using the new Intel N100 CPU, but I chose this one since it uses less power. This one can be powered off POE+ from the TL-SG3428XMP. Three of the NICs are passed through to the Pfsense router VM, using PCIe passthrough. The fourth is used as a management port.
It has the following VMs:
The hypervisor used is Proxmox. For years I used XCP-NG, and honestly I still prefer it, but it became too buggy so I switched to Proxmox instead. The transition process was very long and intensive!
